Laser cutting job work: turn your drawing into a clear order
A clean cutting file is only part of a useful laser cutting enquiry. The buyer also needs to define material, quantity, revision and what happens after cutting. Shabari Metal Products offers fiber laser cutting job work in Bengaluru as part of its sheet metal fabrication service. This guide focuses on handing over an order clearly, whether the output is a flat component or a part that will later be bent, welded and assembled.
Pair the cutting geometry with a readable drawing
Provide the profile file together with a drawing that states the units, material grade and thickness. Accepted file formats include DXF, DWG, STEP and PDF. A drawing helps explain requirements that a contour alone cannot show, such as a critical hole position or a surface that must remain visible. Identify the latest revision in both the file name and the enquiry. If you send several alternatives, label the version you want quoted. Do not leave the shop to choose between similar files. Where a sketch or sample is the starting point, arrange drawing preparation and approval before the final cutting scope is agreed.
Keep quantities and part identities together
For a mixed order, list each part number with its quantity and drawing revision. Separate the quantity needed now from any expected repeat demand. This helps a quotation reflect the actual order rather than an assumed batch size. If left-hand and right-hand parts look similar, identify them separately and explain which faces will be visible after assembly. Tell us whether parts must be grouped by assembly or by part number. Discuss any marking or identification requirement before ordering rather than assuming that every small cut piece will be individually labelled as part of the standard scope.
Explain the next process
A flat blank intended for bending needs a different review from a finished flat plate. State whether Shabari is quoting cutting only or also punching, bending, welding, finishing and assembly. These processes are available within the same factory, but the quotation should still say which ones are included. If another supplier will do the forming, identify who approves the flat pattern and bend allowances. If parts will be coated, indicate any contact faces or holes with fit requirements that need consideration. The aim is a usable component, not simply a profile that matches a screen while creating a problem at the next work stage.
Agree material supply and quality expectations
Name the material grade rather than describing it only as steel or metal. State thickness and identify any certificate requirement. Material mill test certificates are available on request, so raise that need at quotation stage. Ask whether a proposed material and sheet size suit the job; do not infer maximum thickness or bed size from a photograph of the machine. Customer-supplied material arrangements also need specific agreement. If edge appearance, protective film or surface condition matters to the final assembly, describe the expectation and ask for it to be reviewed. A requirement written into the enquiry is easier to resolve than a verbal assumption made after delivery.
Review the quotation against your own list
Check that the offer names the same revision, quantities, material and downstream processes as your enquiry. Ask how changes after approval will be handled and confirm the production schedule before placing the order. Shabari Metal Products has fabricated sheet metal in Bengaluru since 2006. You can contact sales@shabarimetals.in or +91 99453 80273 with the files and a short description of the application. For repeat work, keep the approved drawing and purchase reference together so the next request does not accidentally revive an older profile. This is especially useful when a prototype changes before the production batch.
Common questions
Should I send only a DXF file?
Send the geometry together with a readable drawing or specification showing units, material, thickness, quantity and revision. The profile alone may not explain the critical dimensions or the work required after cutting.
Can the same enquiry include bending and welding?
Yes. Shabari offers cutting, forming, welding, finishing and assembly in one factory. List the operations needed and check that the quotation covers them rather than assuming every laser cutting price includes complete fabrication.
What should I do when a part changes after quotation?
Send a clearly identified new revision and describe the change before approving production. Ask for its effect on price and schedule to be confirmed, and retain the final approved version for repeat orders.
Plan your fabrication order
Prepare the specifications that help us review your drawings and quote accurately.
Send us your drawing
Send a DXF, DWG, STEP or PDF — or a sample part if there is no drawing. Our engineering desk reviews drawings and responds within 24 business hours.